Reverse Osmosis
Water Treatment      


REVERSE OSMOSIS
Reverse Osmosis (RO) uses advanced semi-permeable membrane technology to remove and reject impurities in the water far beyond the capabilities of normal filtration. Unlike ordinary filters, Reverse Osmosis removes DISSOLVED minerals and creates water equal in quality to DISTILLED water.

HERE'S HOW:
1. A five micron, high density sediment pre-filter removes dirt, rust, sand and other solid impurities.
2. A five micron activated carbon pre-filter removes chlorine used in municipal water supplies.
3. A backup activated carbon block filter further protects the RO membrane from attack by chlorine.
4. Water pressure on the membrane allows pure water to pass through, removing up to 98% of dissolved minerals, which are flushed from the surface of the membrane and disposed of through the drain line.

The RO-Series
    Standard Features
  • 1st Stage - 5 micron sediment filter
  • 2nd Stage - 5 micron carbon block
  • 3rd Stage - 5 micron block
  • High capacity low pressure RO membrane
  • Wall mounted
  • Space saving design
  • Low maintence
  • Pressure gauges & shut off vlaves included
  • Saddle valve, Drain kit, plastic tubing included
*Available Sizes
      RO-50:          50 GPD
      RO-120:      120 GPD
      RO-450:      450 GPD
      RO-900:      900 GPD

*Output of all RO systems vary with water temperature, pressure and mineral content. Adding a pressure tank has the same effect as reducing the inlet pressure. RO Series Specifications

R-13 Compact Wall Mount
    Standard Features
  • Power coated steel frames
  • Inlet solenoid valve
  • Pre-filter
  • 1/2 HP Motor
  • Pre-filter & pump pressure gauges
  • Product water & drain water flow meters
  • Non-metallic membrane housing
  • Stainless Steel product water check valve
  • On/Off toggle switch
  • Low-pressure shut-off with auto restart
  • Feed water and product water TDS monitor
*Available Sizes
      R-13-0250:          250 GPD
      R-13-0600:          600 GPD
      R-13-1200:        1200 GPD

*Output of all RO systems vary with water temperature, pressure and mineral content. R-13 Series Specifications and Installations (1MB)

    Applications
  • Computer Rooms
  • Clean Rooms
  • Electronic Fabrication
  • Laboratories
  • Museums
  • Hospitals & Clinics
  • Printing Plants


M-SERIES
Standard Features Optional Features   Operating Parameters:
  • Stainless steel membrane vessels
  • 1:1 waste water recovery M450,
    1000, 2400
  • 75% recovery M-4800,7200, 9600
  • UL 508 listing
  • Low energy TCF membranes
  • Stainless steel front panel
  • Panel mounted flow meters
  • Low pressure safety shut down
  • Built-in sediment and carbon
    pretreatment on systems up to 2400gpd
  • Powder coated frame
  • Low voltage electronics
  • Liquid filled pressure gauges
  • Tank pressure gauge
  • Performance tested and sanitized
  • Voltage options: 115V, 220V, 50/60Hz
  • Low inlet pressure alarm
  • Auto membrane flush at shut down
  • Auto bypass with audible alarm
  • 3-stage sediment, KDF, carbon
    pretreatment
  • Post treatment
  • Panel mounted TDS monitor
Available Sizes:

              M-450: *450 gpd or .33gpm
              M-1000: *1000gpd or .69gpm
              M-2400: *2400gpd or 1.67 gpm
              M-4800: *4800gpd or 3.33gpm
              M-7200: *7200gpd or 5.00gpm
              M-9600: *9600gpd or 6.67gpm

      *Output of all RO systems vary
with water temperature, pressure
and mineral content. Adding a pressure
tank has the same effect as reducing
the inlet pressure. 		    Operating pressure 150-180psig
    Rejection rate: 92-99%
    Feed water pressure: 25-80psig
    Water temperature: 40-100oF
    Maximum TDS: 5000 PPM TDS
    pH: 2-11pH
    Iron: .1 mgl
    CaCo3: 10 grains


Humidity Source, LLC
Ph. 973-916-1001    Fax 973-916-0770