The Humidity source Model WJ-228 can provide up to 12 lbs./hr. of water mist. The atomizing section rests
in a water reservoir mounted in the bottom of a horizontal duct. Air passes over and around the atomizer
with little resistance.
The moisture will evaporate into the duct air lowering the air temperature due to latent heat of evaporation. The amount duct cooling and distance for mist absorption will depend upon inlet air humidity and temperature.
Typical applications include offices, laboratories and production spaces which are served by air quantities of more than 1200 cfm and where relative humidity as high as 50% is required. Complete Specifications (259 KB). and Installation Sheets (465 KB). are available for view or download.
|Electric Motor:||.76 amps, 115 volts, 1ph - 60 hz, 3250 RPM|
| Supply: 1/8 in. male pipe thread.
Overflow: 1/4 in. female pipe thread.
Operating pressure range: 10-100 psig.
Humidity Source, LLC
Ph. 973-916-1001 Fax 973-916-0770