FOR IN-DUCT APPLICATIONS

Centrifugal Atomizing

Models WT and WT-B can provide up to 24 pounds of water mist per hour. The atomizing section rests in a small water reservoir suspended under or mounted in the bottom of a horizontal duct run and air passes over and around the atomizer producing negligible static pressure.

The moisture will evaporate into the duct air and its latent heat of vaporization will depress the dry bulb temperature of the duct air. The amount will depend upon the moisture and air quantities.

Typical applications include offices and laboratories or small production spaces which are served by air quantities of more than 2000 c.f.m. and in which room conditions of as high as 50% relative humidity may be required. Complete Specifications (212 KB). and Installation Sheets (468 KB). are available for viewing or download in a PDF format.


Electric Motor:       Model WT:        1.15 amps, 115 volts, 1ph - 50/60 hz
      Model WT-B:      .55 amps, 230 volts,1ph - 50/60 hz
Water Connections
And Pressures: 		      Supply: 1/8 in. male pipe thread.
      Overflow: 1/4 in. female pipe thread.
      Operating pressure range: 10-100 psig.